JoinTech Fermentation Glycol Chiller with Digital Control | 4 Pump Model | G40

Introducing the JoinTech Fermentation Glycol Chiller G40 with 4 individually controlled pumps. A compact multi-fermenter chilling solution which offers high performance for homebrewers and small volume breweries.

Specifications

Refrigerant: r600a isobutane.
Cooling Power: 400W (0.54hp) (Rated at 22°C)
Input Power: 210W
Tank: 30L Water Capacity
Max Head (per pump): 5 meter
Max Flow (per pump): 600L/Hr
Input/Output Fitting: Dry Break JoinTech 1/2" Male Fittings ~ Requires Dry Break Female JoinTechs for hosing (13mm ID)
4 x - Temperature Probes 3m x 4mm OD  (located under the hood)
Dimensions: 410mm x 410mm x 660mm
Castor wheels included

This glycol chiller / ice bank comes as standard with 4 built-in submersible pumps each with independent digital controllers allowing the optimum fermentation or cold crash temperature to be set for up to four fermenters or brite tanks.

The in-built independent digital temperature controllers provides the ability to ferment at ale temperatures in one vessel while simultaneously cold crashing in another vessel.

Please note this is for the unit only, it does not come with attachments for the lines such as  tubing for the chilling lines, or polypropylene glycol.

It has a cooling capacity of about 780W or 1HP making it suitable for crash chilling even in hot ambient temperatures in your garage or brewery.

The reservoir is completely enclosed including the removable lid, which aids in cooling performance due to less heat loss.

Glycol Temp Controller Instructions
On the glycol temp controller below press the up and down buttons at the same time.This will get you into the advanced parameter settings were you can move between F0-F13 to set the controller to the desired settings as shown in the table below: