55Ltr X 2″ Reflux Complete Distillation Kit

This Kit contains everything you need to start distilling. The only additiona you may want to consider is your water supply for cooling. You could take water from your general water supply or run a small fountain pump in a cooler box, tank or even swimming pool. We do have pumps available with various sizes to choose from. What is important it to look at the flow rate to the maximum height of your column. 200L per hour is more than sufficiant at the top of the condensers but you may need to consider lifting the water supply to achieve flow rate or get a larger pump to pump to the height required.

This Machine easily achieves 95% at in incredibly good flow rate. The 38L boiler is large enough to hold 30L with sufficiant head space. The boiler has level marking inside so there is no guessing when making cut calculations The base is a compressed 3 layer design, 6mm think so it is suitable for electical element, gas burner or induction heating. High grade stainless steel materials are used in the fabrication of these units. We have included our high power spirit condenser on the column ensuring that if you decide to upgrade your distillation column later, you have the knock down power to boot. This unit uses 2X90 degree bends instead of just 1 X 180 degree, giving line arm position flexability. This is especially useful if you want to keep high proof alcohol away from flames on gas burners. Being fully modular means the upgrade possibilities later are endless. We really think you will appreciate the quality of the column.

 

R10,950.00R11,205.00 VAT Incl.

Description

2″ X 800mm Column includes:

  • 1 X 2″ X 500mm Spool
  • 1 X 2" X 200mm Dephlegmator reflux condenser - 1/2" Male water connections
  • 1 X 2″ elbow 90 degree
  • 1 X 2″ elbow 90 degree with nipple for thermometer
  • 1 X 2″ Dephlegmator Spirit condenser - 1/2" Male water connections High power unit.
  • 1 X 2″ (51mm) OD64mm SS304 reducer x Pagoda 9,5mm with air pipe 1pcs
  • 6 X 2″ Silicone gaskets
  • 6 X 2″ Clamps
  • 1 X Digital thermometer

Boiler includes:

  • 1 X Tank 55L 
  • 1 X Bell lid with 2" port
  • 1 X 350mm Silicone gasket for bell lid
  • 1 X 350mm Clamp for lid
  • 1 X 3/4″ ball valve
  • 1 X 2″ Gasket
  • 1 X 2″ end cap
  • 1 X 2″ Clamps
  • 1 X Pressure relief safety valve

Extras in this kit:

  • Element with 2m Cable and a plug top
  • 5 X 1/2" Female - 12mm Hose Fittings
  • 3m Blue Hose for water supply
  • 3m Red Hose for water return to tank
  • 1m Clear Hose for condenser exit, to assist in visual confirmation of water flow
  • 1 X Needle control valve to control water flow to the reflux condenser
  • 2 X Y-Connectors
  • 1 X Voltage regulator control panel

Additional clamps and gaskets can be purchased seperately.

PLEASE NOTE: THE UNIT IT SUPPLIED AS A KIT AND REQUIRES ASSEMBLY, NOTHING DIFFICULT THOUGH AND MOSTELY JUST CLAMPS. THIS UNIT EXCLUDES THE PUMP AND WATER SUPPLY TO THE CONDENSERS.

Additional information

Weight 22 kg
Dimensions 40 × 40 × 45 cm
Controller

Voltage Regulator, PID Controller

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.